Foam Pads
Unlike wool pads, there are no blended foam buffing pads. Foam pads are 100% foam, but they perform slightly different from each other on the basis of how they’re constructed. Under a microscope, foam pads look like a bee’s honeycomb, small uniformly shaped cells. The smaller the cells the more densely the construction, this type of foam pad would be considered less aggressive, thus it would be considered a finishing pad. The opposite effect takes place if the foam cells were larger, or less dense. This construction will cause the foam pad to be more aggressive, as in a compounding pad. There are various grades of foam pads on either side of the aggressive or finishing scale. We make up to six grades of foam pads; each represented by a different color. Early on, foam buffing pad colors were standardized, however, more colors were added to the mix and now there is a broad band or examples. Yellow, black and white are the most common colors across the board; however, our own range of colors has expanded to include blue and green. We make many different size and configurations of foam buffing pads, ranging from 3” to 8”. Our recognized labels such as center tee, ventilated or standard dome shape faced foam pads come to mind. No job is too big or to small; we have the right selection with quality to match. All of our pads are made of high strength reticulated foam. In other words, the cells are open; this allows air to flow through the foam. Chemical compounds and polishes require the right amount of air flow through the foam. Open cell foam is ideal for this process to succeed. Not only is closed cell foam not ideal, it is weaker structurally.
#520EG EdgeGuard Foam Pad, Black, Finishing, 5" / 130mm (2 pack)
Loop 5" / 130mm
Face Dia. 6"
Thickness 1"
#534EG EdgeGuard Foam Pad, Yellow, Polishing, 5" / 130mm (2 pack)
Loop Dia. 5" / 130mm
Face Dia. 6"
Thickness 1"
#554EG EdgeGuard Foam Pad, Blue, Heavy Cut, 5" / 130mm (2 pack)
Loop Dia. 5"
Face Dia. 6"
Thickness 1"
#556EG EdgeGuard Foam Pad, Blueberry, Heavy Polishing, 5" / 130mm (2 pack)
Loop Dia. 5" / 130mm
Face Dia. 6"
Thickness 1"
#572EG EdgeGuard Foam Pad, Maroon, Medium Cut, 5" / 130mm (2 pack)
Loop Dia. 5" / 130mm
Face Dia. 6"
Thickness 1"
#592EG EdgeGuard Foam Pad, White, Polishing/Finishing, 5" / 130mm (2 pack)
Loop Dia. 5" / 130mm
Face Dia. 6"
Thickness 1"
1" Uro-Tec™ Coarse Blue Heavy Cutting Foam Pad
- Loop diameter: 1.375"
- Foam thickness: .750"
1" Uro-Tec™ Soft White Finishing Foam Pad
- Loop diameter: 1.375"
- Foam thickness: .750"
1" Uro-Tec™ Yellow Polishing Foam Pad
- Loop diameter: 1.375"
- Foam thickness: .750"
1" Uro-Tec™Maroon Medium Cut/Heavy Polishing Foam Pad
- Loop diameter: 1.375"
- Foam thickness: .750"
2" Uro-Tec™ Coarse Blue Heavy Cutting Foam Pad
- Loop diameter: 2.125"
- Foam thickness: .750"
2" Uro-Tec™ Soft White Finishing Foam Grip Pad™
- Loop diameter: 2.125"
- Foam thickness: .750"
2" Uro-Tec™ Yellow Polishing Foam Pad
- Loop diameter: 2.125"
- Foam thickness: .750"
2" Uro-Tec™Maroon Medium Cut/Heavy Polishing Foam Pad
- Loop diameter: 2.125"
- Foam thickness: .750"
3" Uro-Tec™ Coarse Blue Heavy Cutting Foam Pad
- Loop diameter: 3"
- Foam thickness: .750"
3" Black Curved Back Foam Grip Pad™
Our 3" Curved Back Foam Pads have quality hook & loop material for fast easy pad loading with a domed face for improved buffing along with reinforced plastic backing. These pads are suitable for small buffing areas and are engineered for smooth performance.
- Diameter: 3"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Black
- Application: Finishing
- Foam PPI: 80
- Thickness: 1"
- Suggested RPM: 1200 - 1750
3" Uro-Tec™ Soft White Finishing Foam Grip Pad™
- Loop diameter: 3"
- Foam thickness: .750"
3" Uro-Tec™ Yellow Polishing Foam Pad
- Loop diameter: 3"
- Foam thickness: .750"
3" Uro-Tec™Maroon Medium Cut/Heavy Polishing Foam Pad
- Loop diameter: 3"
- Foam thickness: .750"
3" Yellow Curved Back Foam Grip Pad™
Our 3" Curved Back Foam Pads have quality hook & loop material for fast easy pad loading with a domed face for improved buffing along with reinforced plastic backing. These pads are suitable for small buffing areas and are engineered for smooth performance.
- Diameter: 3"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Yellow
- Application: Lt. Compounding/Polishing
- Foam PPI: 50
- Thickness: 1"
- Suggested RPM: 1200 - 1750
4" Black Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Black
- Application: Finishing
- Foam PPI: 80
- Thickness: 1"
4" Blue Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Blue
- Application: Lt. Polishing
- Foam PPI: 70
- Thickness: 1"
4" Green Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Green
- Application: Polishing
- Foam PPI: 60
- Thickness: 1"
4" Orange Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Un-Reticulated Polyester Foam
- Material Color: Orange
- Application: Med. Cutting
- Foam PPI: N/A
- Thickness: 1"
4" White Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: White
- Application: Ultra Finishing
- Foam PPI: 90
- Thickness: 1"
4" Yellow Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Un-Reticulated Polyester Foam
- Material Color: Yellow
- Application: Cutting
- Foam PPI: N/A
- Thickness: 1"
5.5" Flat Faced D.A. Euro Orange Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Orange
- Application: Med Cut
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. Euro Red Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Red
- Application: Ultra Finish/Application Pad
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. Euro White Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: White
- Application: Heavy Polishing
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. Euro Yellow Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Yellow
- Application: Heavy Cutting
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. US Black Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Black
- Application: Finishing
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. US Blue Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Blue
- Application: Lt. Polishing
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. US Green Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Green
- Application: Polishing
- Material Type: Euro Prepolymer Foam
5.5" Green Extreme Cutting Low Pro Foam Grip Pad™
The most robust foam pads ever created!
Buff & Shine Low-Pro Large Throw Foam Pads will forever change your expectations for how long a foam pad should last. Constructed out of state-of-the-art foam formulations (Buff & Shine's specialty), Buff & shine Low-Pro Large Throw Foam Pads were designed to withstand the massive orbit of large-throw polishers. If you're sick and tired of going through a set of pads after each detail, Buff & Shine Low-Pro Large Throw Foam Pads will save you time and money.
Buff & Shine, an innovator in the car care foam technology industry, pulled out all the stops when developing their new line of Low-Pro Foam Pads. It's apparent right away that Buff & Shine spent a great amount of time meticulously testing and redesigning each foam pad until it was absolutely perfect. These lightweight, robust foam pads utilize a new foam formulation that promises to outlast and outperform conventional foam pads on a large-throw random orbital polisher.
Benefits of Buff & Shine Low-Pro Large Throw Foam Pads:
- Made in USA
- New foam formulation prevents pad collapsing
- Custom foam grades for quick defect removal
- High heat resistant rubber interface
- Engineered for perfect balance
Buff & shine Low-Pro Large Throw Foam Pads have an engineered rubber interface which is flame, fuel and oil resistant. This unique interface is what enables Buff & shine Low-Pro Large Throw Foam Pads to withstand the immense amount of heat created by large throw polishers. The interface also provides constant pressure to the surface being polished for consistent results.
Buff & shine Low-Pro Large Throw Foam Pads are available in the following configurations for all your buffing and polishing applications.
Green Extreme Cutting
The GREEN foam pad is constructed of a very coarse, dense sharp foam that is able to level severe defects on hard paint systems. Heavy swirl marks, scratches, type 3water spots and other paint imperfections will be effortlessly removed with this pad. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Orange Medium Cut/Polishing
The ORANGE foam pad is constructed out of a dense, sharp foam that is able to level moderate to heavy defects on hard paint systems. Swirls, light scratches, type 2 water spots and other paint imperfections will easily be removed with this pad. This pad is aggressive enough for most applications on factory clear coat systems. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Maroon Polishing
The MAROON foam pad is almost as dense as the orange foam pad, but it's constructed out of a less aggressive foam that is perfect for refining a soft paint system to an extremely high gloss. The Maroon foam pad removes light swirl marks, holograms, clay-induced marring, and other light paint imperfections. This pad finishes exceptionally well considering the mechanical polishing ability that it provides.
Red Finishing
The RED foam pad is the softest foam pad in the Low-Pro system. It is designed for applying ultra-fine polishes, glazes, waxes and synthetic sealants. The Red foam pad will finish flawlessly on any paint system, creating an exceptionally glossy finish worthy of a show car.
- Foam Dia: 5.5"
- Loop Dia: 5"
- Pad Thickness: .875"
- Application: Extreme Cut
5.5" Maroon Polishing Low Pro Foam Grip Pad™
The most robust foam pads ever created!
Buff & Shine Low-Pro Large Throw Foam Pads will forever change your expectations for how long a foam pad should last. Constructed out of state-of-the-art foam formulations (Buff & Shine's specialty), Buff & shine Low-Pro Large Throw Foam Pads were designed to withstand the massive orbit of large-throw polishers. If you're sick and tired of going through a set of pads after each detail, Buff & Shine Low-Pro Large Throw Foam Pads will save you time and money.
Buff & Shine, an innovator in the car care foam technology industry, pulled out all the stops when developing their new line of Low-Pro Foam Pads. It's apparent right away that Buff & Shine spent a great amount of time meticulously testing and redesigning each foam pad until it was absolutely perfect. These lightweight, robust foam pads utilize a new foam formulation that promises to outlast and outperform conventional foam pads on a large-throw random orbital polisher.
Benefits of Buff & Shine Low-Pro Large Throw Foam Pads:
- Made in USA
- New foam formulation prevents pad collapsing
- Custom foam grades for quick defect removal
- High heat resistant rubber interface
- Engineered for perfect balance
Buff & shine Low-Pro Large Throw Foam Pads have an engineered rubber interface which is flame, fuel and oil resistant. This unique interface is what enables Buff & shine Low-Pro Large Throw Foam Pads to withstand the immense amount of heat created by large throw polishers. The interface also provides constant pressure to the surface being polished for consistent results.
Buff & shine Low-Pro Large Throw Foam Pads are available in the following configurations for all your buffing and polishing applications.
Green Extreme Cutting
The GREEN foam pad is constructed of a very coarse, dense sharp foam that is able to level severe defects on hard paint systems. Heavy swirl marks, scratches, type 3water spots and other paint imperfections will be effortlessly removed with this pad. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Orange Medium Cut/Polishing
The ORANGE foam pad is constructed out of a dense, sharp foam that is able to level moderate to heavy defects on hard paint systems. Swirls, light scratches, type 2 water spots and other paint imperfections will easily be removed with this pad. This pad is aggressive enough for most applications on factory clear coat systems. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Maroon Polishing
The MAROON foam pad is almost as dense as the orange foam pad, but it's constructed out of a less aggressive foam that is perfect for refining a soft paint system to an extremely high gloss. The Maroon foam pad removes light swirl marks, holograms, clay-induced marring, and other light paint imperfections. This pad finishes exceptionally well considering the mechanical polishing ability that it provides.
Red Finishing
The RED foam pad is the softest foam pad in the Low-Pro system. It is designed for applying ultra-fine polishes, glazes, waxes and synthetic sealants. The Red foam pad will finish flawlessly on any paint system, creating an exceptionally glossy finish worthy of a show car.
- Foam Dia: 5.5"
- Loop Dia: 5"
- Pad Thickness: .875"
- Application: Polishing
5.5" Orange Med. Cut Low Pro Foam Grip Pad™
The most robust foam pads ever created!
Buff & Shine Low-Pro Large Throw Foam Pads will forever change your expectations for how long a foam pad should last. Constructed out of state-of-the-art foam formulations (Buff & Shine's specialty), Buff & shine Low-Pro Large Throw Foam Pads were designed to withstand the massive orbit of large-throw polishers. If you're sick and tired of going through a set of pads after each detail, Buff & Shine Low-Pro Large Throw Foam Pads will save you time and money.
Buff & Shine, an innovator in the car care foam technology industry, pulled out all the stops when developing their new line of Low-Pro Foam Pads. It's apparent right away that Buff & Shine spent a great amount of time meticulously testing and redesigning each foam pad until it was absolutely perfect. These lightweight, robust foam pads utilize a new foam formulation that promises to outlast and outperform conventional foam pads on a large-throw random orbital polisher.
Benefits of Buff & Shine Low-Pro Large Throw Foam Pads:
- Made in USA
- New foam formulation prevents pad collapsing
- Custom foam grades for quick defect removal
- High heat resistant rubber interface
- Engineered for perfect balance
Buff & shine Low-Pro Large Throw Foam Pads have an engineered rubber interface which is flame, fuel and oil resistant. This unique interface is what enables Buff & shine Low-Pro Large Throw Foam Pads to withstand the immense amount of heat created by large throw polishers. The interface also provides constant pressure to the surface being polished for consistent results.
Buff & shine Low-Pro Large Throw Foam Pads are available in the following configurations for all your buffing and polishing applications.
Green Extreme Cutting
The GREEN foam pad is constructed of a very coarse, dense sharp foam that is able to level severe defects on hard paint systems. Heavy swirl marks, scratches, type 3water spots and other paint imperfections will be effortlessly removed with this pad. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Orange Medium Cut/Polishing
The ORANGE foam pad is constructed out of a dense, sharp foam that is able to level moderate to heavy defects on hard paint systems. Swirls, light scratches, type 2 water spots and other paint imperfections will easily be removed with this pad. This pad is aggressive enough for most applications on factory clear coat systems. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Maroon Polishing
The MAROON foam pad is almost as dense as the orange foam pad, but it's constructed out of a less aggressive foam that is perfect for refining a soft paint system to an extremely high gloss. The Maroon foam pad removes light swirl marks, holograms, clay-induced marring, and other light paint imperfections. This pad finishes exceptionally well considering the mechanical polishing ability that it provides.
Red Finishing
The RED foam pad is the softest foam pad in the Low-Pro system. It is designed for applying ultra-fine polishes, glazes, waxes and synthetic sealants. The Red foam pad will finish flawlessly on any paint system, creating an exceptionally glossy finish worthy of a show car.
- Foam Dia: 5.5"
- Loop Dia: 5"
- Pad Thickness: .875"
- Application: Med Cut/Heavy Polish
5.5" Red Finishing Low Pro Foam Grip Pad™
The most robust foam pads ever created!
Buff & Shine Low-Pro Large Throw Foam Pads will forever change your expectations for how long a foam pad should last. Constructed out of state-of-the-art foam formulations (Buff & Shine's specialty), Buff & shine Low-Pro Large Throw Foam Pads were designed to withstand the massive orbit of large-throw polishers. If you're sick and tired of going through a set of pads after each detail, Buff & Shine Low-Pro Large Throw Foam Pads will save you time and money.
Buff & Shine, an innovator in the car care foam technology industry, pulled out all the stops when developing their new line of Low-Pro Foam Pads. It's apparent right away that Buff & Shine spent a great amount of time meticulously testing and redesigning each foam pad until it was absolutely perfect. These lightweight, robust foam pads utilize a new foam formulation that promises to outlast and outperform conventional foam pads on a large-throw random orbital polisher.
Benefits of Buff & Shine Low-Pro Large Throw Foam Pads:
- Made in USA
- New foam formulation prevents pad collapsing
- Custom foam grades for quick defect removal
- High heat resistant rubber interface
- Engineered for perfect balance
Buff & shine Low-Pro Large Throw Foam Pads have an engineered rubber interface which is flame, fuel and oil resistant. This unique interface is what enables Buff & shine Low-Pro Large Throw Foam Pads to withstand the immense amount of heat created by large throw polishers. The interface also provides constant pressure to the surface being polished for consistent results.
Buff & shine Low-Pro Large Throw Foam Pads are available in the following configurations for all your buffing and polishing applications.
Green Extreme Cutting
The GREEN foam pad is constructed of a very coarse, dense sharp foam that is able to level severe defects on hard paint systems. Heavy swirl marks, scratches, type 3water spots and other paint imperfections will be effortlessly removed with this pad. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Orange Medium Cut/Polishing
The ORANGE foam pad is constructed out of a dense, sharp foam that is able to level moderate to heavy defects on hard paint systems. Swirls, light scratches, type 2 water spots and other paint imperfections will easily be removed with this pad. This pad is aggressive enough for most applications on factory clear coat systems. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Maroon Polishing
The MAROON foam pad is almost as dense as the orange foam pad, but it's constructed out of a less aggressive foam that is perfect for refining a soft paint system to an extremely high gloss. The Maroon foam pad removes light swirl marks, holograms, clay-induced marring, and other light paint imperfections. This pad finishes exceptionally well considering the mechanical polishing ability that it provides.
Red Finishing
The RED foam pad is the softest foam pad in the Low-Pro system. It is designed for applying ultra-fine polishes, glazes, waxes and synthetic sealants. The Red foam pad will finish flawlessly on any paint system, creating an exceptionally glossy finish worthy of a show car.
- Foam Dia: 5.5"
- Loop Dia: 5"
- Pad Thickness: .875"
- Application: Finishing
6" Uro-Tec™ Coarse Blue Heavy Cutting Foam Pad
- Loop diameter: 5"
- Foam thickness: 1"
- Face diameter: 6"
- Polisher recommendation: 15mm Long Throw D.A.
6" Black Foam Pad with D.A. Mount
Our Direct Mount Foam Pads are made of durable open cell foam and the mounting plate has strong metal threads of durable construction.
- Diameter: 6"
- Mounting: Direct Mount
- Material Type: Reticulated Polyester Foam
- Material Color: Black
- Application: Finishing
- Foam PPI: 80
- Thickness: 2"
- Thread: 5/16" x 24"
- Suggested OPM: 1200 - 1750
6" D.A. Black Foam Grip Pad™
Our 6" Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. We have a wide range of durable open cell foams for all your buffing needs.
- Diameter: 6"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Black
- Application: Finishing
- Foam PPI: 80
- Thickness: 2"
- Suggested OPM: 1200 - 1750
6" D.A. White Foam Grip Pad™
Our 6" Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. We have a wide range of durable open cell foams for all your buffing needs.
- Diameter: 6"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: White
- Application: Ultimate Finish
- Foam PPI: 90
- Thickness: 2"
- Suggested OPM: 1200 - 1750
6" D.A. Yellow Foam Grip Pad™
Our 6" Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. We have a wide range of durable open cell foams for all your buffing needs.
- Diameter: 6"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Yellow
- Application: Lt. Compounding/Polishing
- Foam PPI: 50
- Thickness: 2"
- Suggested OPM: 1200 - 1750
6" European Orange D.A. Foam Grip Pad™
Our 6" European Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. The European Foam is a high density foam that offers an extremely long buffing life along with high performance in random orbit applications.
- Diameter: 6"
- Mounting: Grip Pad
- Material Type: Euro Prepolymer Foam
- Material Color: Orange
- Application: Lt. Compounding
- Thickness: 2"
- Suggested OPM: 1200 - 1750
6" European Orange D.A. Foam Grip Pad™
Our 6" European Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. The European Foam is a high density foam that offers an extremely long buffing life along with high performance in random orbit applications.
- Diameter: 6"
- Mounting: Grip Pad
- Material Type: Euro Prepolymer Foam
- Material Color: Orange
- Application: Lt. Compounding
- Thickness: 1.25"
- Suggested OPM: 1200 - 1750
6" European Orange Foam Pad with High-Speed Polisher Mount
Our 6" European Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. The European Foam is a high density foam that offers an extremely long buffing life along with high performance in random orbit applications.
- Diameter: 6"
- Mounting: 5/8" x 11" Plate
- Material Type: Euro Prepolymer Foam
- Material Color: Orange
- Application: Lt. Compounding
- Thickness: 2"
- Suggested RPM: 1200 - 1750
6" European White D.A. Foam Grip Pad™
Our 6" European Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. The European Foam is a high density foam that offers an extremely long buffing life along with high performance in random orbit applications.
- Diameter: 6"
- Mounting: Grip Pad
- Material Type: Euro Prepolymer Foam
- Material Color: White
- Application: Polishing
- Thickness: 2"
- Suggested OPM: 1200 - 1750
6" European White D.A. Foam Grip Pad™
Our 6" European Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. The European Foam is a high density foam that offers an extremely long buffing life along with high performance in random orbit applications.
- Diameter: 6.25"
- Mounting: Grip Pad
- Material Type: Euro Prepolymer Foam
- Material Color: White
- Application: Polishing
- Thickness: 1.25"
- Suggested OPM: 1200 - 1750
6" European White Foam Pad with High-Speed Polisher Mount
Our 6" European Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. The European Foam is a high density foam that offers an extremely long buffing life along with high performance in random orbit applications.
- Diameter: 6"
- Mounting: 5/8" x 11" Plate
- Material Type: Euro Prepolymer Foam
- Material Color: White
- Application: Polishing
- Thickness: 2"
- Suggested RPM: 1200 - 1750