Products
6" Uro-Fiber™ Finisher Pad
- Made in the USA
- Patent Pending dual fiber stitch
- Strongest interface foam on the market
- Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
- Not recommended for a High-Speed/Rotary polisher
- Clean with soft nylon brush or compressed air per buffing cycle
- Able to cut, polish and finish on soft paints
- Washable
- Available in 6”, 5”, 3” diameters
If you like the overall performance and versatility of Buff and Shine’s Uro-Fiber pads (with the “black and white” fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.
It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call “The Uro-Fiber Twins”. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.
6" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
6 inch Buff and Shine Uro-Fiber pad can be used with a 5 or 6 inch backing plate.
6" Uro-Tec™ Coarse Blue Heavy Cutting Foam Grip Pad™
This line up is designed for maximum performance for any machine out on the market today.
For optimum performance on your machine and with your chemical of choice, this new line-up is the answer
You can expect the best with Buff and Shine and as always, proudly made in the USA.
- Foam Dia: 6"
- Loop Dia: 5"
- Pad Thickness: 1"
- Application: Cutting
6" Uro-Tec™ Maroon Med. Cut/Polishing Foam Grip Pad™
This line up is designed for maximum performance for any machine out on the market today.
For optimum performance on your machine and with your chemical of choice, this new line-up is the answer
You can expect the best with Buff and Shine and as always, proudly made in the USA.
- Foam Dia: 7"
- Loop Dia: 6"
- Pad Thickness: 1.25"
- Application: Med Cut/Heavy Polish
6" Uro-Tec™ Maroon Med. Cut/Polishing Foam Grip Pad™
This line up is designed for maximum performance for any machine out on the market today.
For optimum performance on your machine and with your chemical of choice, this new line-up is the answer
You can expect the best with Buff and Shine and as always, proudly made in the USA.
- Foam Dia: 6"
- Loop Dia: 5"
- Pad Thickness: 1"
- Application: Med Cut/Heavy Polish
6" Uro-Tec™ Maroon Medium Cut/Heavy Polishing Foam Pad
- Loop diameter: 5"
- Foam thickness: 1"
- Face diameter: 6"
- Polisher recommendation: 15mm Long Throw D.A.
6" Uro-Tec™ Soft White Finishing Foam Grip Pad™
- Loop diameter: 5"
- Foam thickness: 1"
- Face diameter: 6"
- Polisher recommendation: 15mm Long Throw D.A.
6" Uro-Tec™ Soft White Finishing Foam Pad Grip Pad™
This line up is designed for maximum performance for any machine out on the market today.
For optimum performance on your machine and with your chemical of choice, this new line-up is the answer
You can expect the best with Buff and Shine and as always, proudly made in the USA.
- Foam Dia: 7"
- Loop Dia: 6"
- Pad Thickness: 1.25"
- Application: Finishing
6" Uro-Tec™ Soft White Finishing Foam Pad Grip Pad™
This line up is designed for maximum performance for any machine out on the market today.
For optimum performance on your machine and with your chemical of choice, this new line-up is the answer
You can expect the best with Buff and Shine and as always, proudly made in the USA.
- Foam Dia: 6"
- Loop Dia: 5"
- Pad Thickness: 1"
- Application: Finishing
6" Uro-Tec™ Yellow Polishing Foam Pad
- Loop diameter: 5"
- Foam thickness: 1"
- Face diameter: 6"
- Polisher recommendation: 15mm Long Throw D.A.
6" Uro-Tec™ Yellow Polishing Foam Pad Grip Pad™
This line up is designed for maximum performance for any machine out on the market today.
For optimum performance on your machine and with your chemical of choice, this new line-up is the answer
You can expect the best with Buff and Shine and as always, proudly made in the USA.
- Foam Dia: 7"
- Loop Dia: 6"
- Pad Thickness: 1.25"
- Application: Polishing
6" Uro-Tec™ Yellow Polishing Foam Pad Grip Pad™
This line up is designed for maximum performance for any machine out on the market today.
For optimum performance on your machine and with your chemical of choice, this new line-up is the answer
You can expect the best with Buff and Shine and as always, proudly made in the USA.
- Foam Dia: 6"
- Loop Dia: 5"
- Pad Thickness: 1"
- Application: Polishing
6" White Foam Pad with D.A. Mount
Our Direct Mount Foam Pads are made of durable open cell foam and the mounting plate has strong metal threads of durable construction.
- Diameter: 6"
- Mounting: Direct Mount
- Material Type: Reticulated Polyester Foam
- Material Color: White
- Application: Ultimate Finish
- Foam PPI: 90
- Thickness: 2"
- Thread: 5/16" x 24"
- Suggested OPM: 1200 - 1750
6" White Foam Pad with High-Speed Polisher Mount
Our Direct Mount Foam Pads are made of durable open cell foam and the mounting plate has strong metal threads of durable construction.
- Diameter: 6"
- Mounting: Direct Mount
- Material Type: Reticulated Polyester Foam
- Material Color: White
- Application: Ultimate Finish
- Foam PPI: 90
- Thickness: 2"
- Thread: 5/8" x 11"
- Suggested RPM: 1200 - 1750
6" Yellow Foam Pad with D.A. Mount
Our Direct Mount Foam Pads are made of durable open cell foam and the mounting plate has strong metal threads of durable construction.
- Diameter: 6"
- Mounting: Direct Mount
- Material Type: Reticulated Polyester Foam
- Material Color: Yellow
- Application: Lt. Compounding/Polishing
- Foam PPI: 50
- Thickness: 2"
- Thread: 5/16" x 24"
- Suggested OPM: 1200 - 1750
6" Yellow Foam Pad with High-Speed Polisher Mount
Our Direct Mount Foam Pads are made of durable open cell foam and the mounting plate has strong metal threads of durable construction.
- Diameter: 6"
- Mounting: Direct Mount
- Material Type: Reticulated Polyester Foam
- Material Color: Yellow
- Application: Lt. Compounding/Polishing
- Foam PPI: 50
- Thickness: 2"
- Thread: 5/8" x 11"
- Suggested RPM: 1200 - 1750
6.5" Black & Black Micro Fiber Finishing Grip Pad™
Buff and Shine Micro fiber buffing pads are manufactured with precision in the USA using only the finest foam and micro fiber material. Buff and Shine Microfiber pads have beveled edges for FAST and EASY pad centering. Unique, back and plush micro fiber pad material is safe for both cutting and finishing applications. Buff and Shine Microfiber pads are built for maximum performance and long lasting durability on rotary and DA polishers.
- Face Dia: 6.5"
- Loop Dia: 6"
- Application: Polishing & Finishing
6.5" Black & Orange Micro Fiber Cutting Grip Pad™
Buff and Shine Micro fiber buffing pads are manufactured with precision in the USA using only the finest foam and micro fiber material. Buff and Shine Microfiber pads have beveled edges for FAST and EASY pad centering. Unique, back and plush micro fiber pad material is safe for both cutting and finishing applications. Buff and Shine Microfiber pads are built for maximum performance and long lasting durability on rotary and DA polishers.
- Face Dia: 6.5"
- Loop Dia: 6"
- Application: Cutting
6.5" D.A. Black Foam Grip Pad™
Our 6" Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. We have a wide range of durable open cell foams for all your buffing needs.
- Diameter: 6.25"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Black
- Application: Finishing
- Foam PPI: 80
- Thickness: 1.25"
- Suggested OPM: 1200 - 1750
6.5" D.A. Blue Foam Grip Pad™
Our 6" Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. We have a wide range of durable open cell foams for all your buffing needs.
- Diameter: 6.25"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Blue
- Application: Soft Polish
- Foam PPI: 70
- Thickness: 1.25"
- Suggested OPM: 1200 - 1750
6.5" D.A. Green Foam Grip Pad™
Our 6" Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. We have a wide range of durable open cell foams for all your buffing needs.
- Diameter: 6.25"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Green
- Application: Polish
- Foam PPI: 60
- Thickness: 1.25"
- Suggested OPM: 1200 - 1750
6.5" D.A. White Foam Grip Pad™
Our 6" Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. We have a wide range of durable open cell foams for all your buffing needs.
- Diameter: 6.25"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: White
- Application: Ultimate Finish
- Foam PPI: 90
- Thickness: 1.25"
- Suggested OPM: 1200 - 1750
6.5" D.A. Yellow Foam Grip Pad™
Our 6" Grip Foam Pads have quality hook & loop material for fast easy pad loading with a strong adhesive that prevents delaminating. We have a wide range of durable open cell foams for all your buffing needs.
- Diameter: 6.25"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Yellow
- Application: Lt. Compounding/Polishing
- Foam PPI: 50
- Thickness: 1.25"
- Suggested OPM: 1200 - 1750
6.5" Green Extreme Cutting Low Pro Foam Grip Pad™
The most robust foam pads ever created!
Buff & Shine Low-Pro Large Throw Foam Pads will forever change your expectations for how long a foam pad should last. Constructed out of state-of-the-art foam formulations (Buff & Shine's specialty), Buff & shine Low-Pro Large Throw Foam Pads were designed to withstand the massive orbit of large-throw polishers. If you're sick and tired of going through a set of pads after each detail, Buff & Shine Low-Pro Large Throw Foam Pads will save you time and money.
Buff & Shine, an innovator in the car care foam technology industry, pulled out all the stops when developing their new line of Low-Pro Foam Pads. It's apparent right away that Buff & Shine spent a great amount of time meticulously testing and redesigning each foam pad until it was absolutely perfect. These lightweight, robust foam pads utilize a new foam formulation that promises to outlast and outperform conventional foam pads on a large-throw random orbital polisher.
Benefits of Buff & Shine Low-Pro Large Throw Foam Pads:
- Made in USA
- New foam formulation prevents pad collapsing
- Custom foam grades for quick defect removal
- High heat resistant rubber interface
- Engineered for perfect balance
Buff & shine Low-Pro Large Throw Foam Pads have an engineered rubber interface which is flame, fuel and oil resistant. This unique interface is what enables Buff & shine Low-Pro Large Throw Foam Pads to withstand the immense amount of heat created by large throw polishers. The interface also provides constant pressure to the surface being polished for consistent results.
Buff & shine Low-Pro Large Throw Foam Pads are available in the following configurations for all your buffing and polishing applications.
Green Extreme Cutting
The GREEN foam pad is constructed of a very coarse, dense sharp foam that is able to level severe defects on hard paint systems. Heavy swirl marks, scratches, type 3water spots and other paint imperfections will be effortlessly removed with this pad. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Orange Medium Cut/Polishing
The ORANGE foam pad is constructed out of a dense, sharp foam that is able to level moderate to heavy defects on hard paint systems. Swirls, light scratches, type 2 water spots and other paint imperfections will easily be removed with this pad. This pad is aggressive enough for most applications on factory clear coat systems. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Maroon Polishing
The MAROON foam pad is almost as dense as the orange foam pad, but it's constructed out of a less aggressive foam that is perfect for refining a soft paint system to an extremely high gloss. The Maroon foam pad removes light swirl marks, holograms, clay-induced marring, and other light paint imperfections. This pad finishes exceptionally well considering the mechanical polishing ability that it provides.
Red Finishing
The RED foam pad is the softest foam pad in the Low-Pro system. It is designed for applying ultra-fine polishes, glazes, waxes and synthetic sealants. The Red foam pad will finish flawlessly on any paint system, creating an exceptionally glossy finish worthy of a show car.
- Foam Dia: 6.5"
- Loop Dia: 6"
- Pad Thickness: .875"
- Application: Extreme Cut
6.5" Maroon Polishing Low Pro Foam Grip Pad™
The most robust foam pads ever created!
Buff & Shine Low-Pro Large Throw Foam Pads will forever change your expectations for how long a foam pad should last. Constructed out of state-of-the-art foam formulations (Buff & Shine's specialty), Buff & shine Low-Pro Large Throw Foam Pads were designed to withstand the massive orbit of large-throw polishers. If you're sick and tired of going through a set of pads after each detail, Buff & Shine Low-Pro Large Throw Foam Pads will save you time and money.
Buff & Shine, an innovator in the car care foam technology industry, pulled out all the stops when developing their new line of Low-Pro Foam Pads. It's apparent right away that Buff & Shine spent a great amount of time meticulously testing and redesigning each foam pad until it was absolutely perfect. These lightweight, robust foam pads utilize a new foam formulation that promises to outlast and outperform conventional foam pads on a large-throw random orbital polisher.
Benefits of Buff & Shine Low-Pro Large Throw Foam Pads:
- Made in USA
- New foam formulation prevents pad collapsing
- Custom foam grades for quick defect removal
- High heat resistant rubber interface
- Engineered for perfect balance
Buff & shine Low-Pro Large Throw Foam Pads have an engineered rubber interface which is flame, fuel and oil resistant. This unique interface is what enables Buff & shine Low-Pro Large Throw Foam Pads to withstand the immense amount of heat created by large throw polishers. The interface also provides constant pressure to the surface being polished for consistent results.
Buff & shine Low-Pro Large Throw Foam Pads are available in the following configurations for all your buffing and polishing applications.
Green Extreme Cutting
The GREEN foam pad is constructed of a very coarse, dense sharp foam that is able to level severe defects on hard paint systems. Heavy swirl marks, scratches, type 3water spots and other paint imperfections will be effortlessly removed with this pad. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Orange Medium Cut/Polishing
The ORANGE foam pad is constructed out of a dense, sharp foam that is able to level moderate to heavy defects on hard paint systems. Swirls, light scratches, type 2 water spots and other paint imperfections will easily be removed with this pad. This pad is aggressive enough for most applications on factory clear coat systems. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Maroon Polishing
The MAROON foam pad is almost as dense as the orange foam pad, but it's constructed out of a less aggressive foam that is perfect for refining a soft paint system to an extremely high gloss. The Maroon foam pad removes light swirl marks, holograms, clay-induced marring, and other light paint imperfections. This pad finishes exceptionally well considering the mechanical polishing ability that it provides.
Red Finishing
The RED foam pad is the softest foam pad in the Low-Pro system. It is designed for applying ultra-fine polishes, glazes, waxes and synthetic sealants. The Red foam pad will finish flawlessly on any paint system, creating an exceptionally glossy finish worthy of a show car.
- Foam Dia: 6.5"
- Loop Dia: 6"
- Pad Thickness: .875"
- Application: Polishing
6.5" Orange Med. Cut Low Pro Foam Grip Pad™
The most robust foam pads ever created!
Buff & Shine Low-Pro Large Throw Foam Pads will forever change your expectations for how long a foam pad should last. Constructed out of state-of-the-art foam formulations (Buff & Shine's specialty), Buff & shine Low-Pro Large Throw Foam Pads were designed to withstand the massive orbit of large-throw polishers. If you're sick and tired of going through a set of pads after each detail, Buff & Shine Low-Pro Large Throw Foam Pads will save you time and money.
Buff & Shine, an innovator in the car care foam technology industry, pulled out all the stops when developing their new line of Low-Pro Foam Pads. It's apparent right away that Buff & Shine spent a great amount of time meticulously testing and redesigning each foam pad until it was absolutely perfect. These lightweight, robust foam pads utilize a new foam formulation that promises to outlast and outperform conventional foam pads on a large-throw random orbital polisher.
Benefits of Buff & Shine Low-Pro Large Throw Foam Pads:
- Made in USA
- New foam formulation prevents pad collapsing
- Custom foam grades for quick defect removal
- High heat resistant rubber interface
- Engineered for perfect balance
Buff & shine Low-Pro Large Throw Foam Pads have an engineered rubber interface which is flame, fuel and oil resistant. This unique interface is what enables Buff & shine Low-Pro Large Throw Foam Pads to withstand the immense amount of heat created by large throw polishers. The interface also provides constant pressure to the surface being polished for consistent results.
Buff & shine Low-Pro Large Throw Foam Pads are available in the following configurations for all your buffing and polishing applications.
Green Extreme Cutting
The GREEN foam pad is constructed of a very coarse, dense sharp foam that is able to level severe defects on hard paint systems. Heavy swirl marks, scratches, type 3water spots and other paint imperfections will be effortlessly removed with this pad. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Orange Medium Cut/Polishing
The ORANGE foam pad is constructed out of a dense, sharp foam that is able to level moderate to heavy defects on hard paint systems. Swirls, light scratches, type 2 water spots and other paint imperfections will easily be removed with this pad. This pad is aggressive enough for most applications on factory clear coat systems. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Maroon Polishing
The MAROON foam pad is almost as dense as the orange foam pad, but it's constructed out of a less aggressive foam that is perfect for refining a soft paint system to an extremely high gloss. The Maroon foam pad removes light swirl marks, holograms, clay-induced marring, and other light paint imperfections. This pad finishes exceptionally well considering the mechanical polishing ability that it provides.
Red Finishing
The RED foam pad is the softest foam pad in the Low-Pro system. It is designed for applying ultra-fine polishes, glazes, waxes and synthetic sealants. The Red foam pad will finish flawlessly on any paint system, creating an exceptionally glossy finish worthy of a show car.
- Foam Dia: 6.5"
- Loop Dia: 6"
- Pad Thickness: .875"
- Application: Med Cut/Heavy Polish
6.5" Red Finishing Low Pro Foam Grip Pad™
The most robust foam pads ever created!
Buff & Shine Low-Pro Large Throw Foam Pads will forever change your expectations for how long a foam pad should last. Constructed out of state-of-the-art foam formulations (Buff & Shine's specialty), Buff & shine Low-Pro Large Throw Foam Pads were designed to withstand the massive orbit of large-throw polishers. If you're sick and tired of going through a set of pads after each detail, Buff & Shine Low-Pro Large Throw Foam Pads will save you time and money.
Buff & Shine, an innovator in the car care foam technology industry, pulled out all the stops when developing their new line of Low-Pro Foam Pads. It's apparent right away that Buff & Shine spent a great amount of time meticulously testing and redesigning each foam pad until it was absolutely perfect. These lightweight, robust foam pads utilize a new foam formulation that promises to outlast and outperform conventional foam pads on a large-throw random orbital polisher.
Benefits of Buff & Shine Low-Pro Large Throw Foam Pads:
- Made in USA
- New foam formulation prevents pad collapsing
- Custom foam grades for quick defect removal
- High heat resistant rubber interface
- Engineered for perfect balance
Buff & shine Low-Pro Large Throw Foam Pads have an engineered rubber interface which is flame, fuel and oil resistant. This unique interface is what enables Buff & shine Low-Pro Large Throw Foam Pads to withstand the immense amount of heat created by large throw polishers. The interface also provides constant pressure to the surface being polished for consistent results.
Buff & shine Low-Pro Large Throw Foam Pads are available in the following configurations for all your buffing and polishing applications.
Green Extreme Cutting
The GREEN foam pad is constructed of a very coarse, dense sharp foam that is able to level severe defects on hard paint systems. Heavy swirl marks, scratches, type 3water spots and other paint imperfections will be effortlessly removed with this pad. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Orange Medium Cut/Polishing
The ORANGE foam pad is constructed out of a dense, sharp foam that is able to level moderate to heavy defects on hard paint systems. Swirls, light scratches, type 2 water spots and other paint imperfections will easily be removed with this pad. This pad is aggressive enough for most applications on factory clear coat systems. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.
Maroon Polishing
The MAROON foam pad is almost as dense as the orange foam pad, but it's constructed out of a less aggressive foam that is perfect for refining a soft paint system to an extremely high gloss. The Maroon foam pad removes light swirl marks, holograms, clay-induced marring, and other light paint imperfections. This pad finishes exceptionally well considering the mechanical polishing ability that it provides.
Red Finishing
The RED foam pad is the softest foam pad in the Low-Pro system. It is designed for applying ultra-fine polishes, glazes, waxes and synthetic sealants. The Red foam pad will finish flawlessly on any paint system, creating an exceptionally glossy finish worthy of a show car.
- Foam Dia: 6.5"
- Loop Dia: 6"
- Pad Thickness: .875"
- Application: Finishing
7" Uro-Tec™ Coarse Blue Heavy Cutting Foam Pad
- Loop diameter: 6"
- Foam thickness: 1.25"
- Face diameter: 7"
- Polisher recommendation: 21mm Long Throw D.A.
7" Flex Edge Grip Backing Plate
- Diameter: 7"
- Thickness: .5"
- Thread: 5/8" x 11"
- Max RPM: 3000
7" Flex Edge Grip Backing Plate
- Diameter: 7"
- Thickness: .5"
- Thread: 14mm
- Max RPM: 3000
7" Rigid & Flex Edge Grip Backing Plate
- Diameter: 7"
- Thickness: 1"
- Thread: 5/8" x 11"
- Max RPM: 3000
7" Rigid & Flex Edge Grip Backing Plate
- Diameter: 7"
- Thickness: 1"
- Thread: 14 mm
- Max RPM: 3000
7" Rigid Grip Backing Plate
- Diameter: 7"
- Thickness: .5"
- Thread: 5/8" x 11"
- Max RPM: 3000
7" Rigid Grip Backing Plate
- Diameter: 7"
- Thickness: .5"
- Thread: 14mm
- Max RPM: 3000
7" Rigid Grip Backing Plate with Ventilation Holes
- Diameter: 7"
- Thickness: .75"
- Thread: 5/8" x 11"
- Max RPM: 3000
7" Rigid Grip Backing Plate with Ventilation Holes
- Diameter: 7"
- Thickness: .75"
- Thread: 14mm
- Max RPM: 3000
7" Uro-Tec™ Coarse Blue Heavy Cutting Foam Grip Pad™
This line up is designed for maximum performance for any machine out on the market today.
For optimum performance on your machine and with your chemical of choice, this new line-up is the answer
You can expect the best with Buff and Shine and as always, proudly made in the USA.
- Foam Dia: 7"
- Loop Dia: 6"
- Pad Thickness: 1.25"
- Application: Cutting
7" Uro-Tec™ Maroon Medium Cut/Heavy Polishing Foam Grip Pad™
- Loop diameter: 6"
- Foam thickness: 1.25"
- Face diameter: 7"
- Polisher recommendation: 21mm Long Throw D.A.
7" Uro-Tec™ Soft White Finishing Foam Grip Pad™
- Loop diameter: 6"
- Foam thickness: 1.25"
- Face diameter: 7"
- Polisher recommendation: 21mm Long Throw D.A.
7" Uro-Tec™ Yellow Polishing Foam Grip Pad™
- Loop diameter: 6"
- Foam thickness: 1.25"
- Face diameter: 7"
- Polisher recommendation: 21mm Long Throw D.A.
7.5" 100% Natural Wool 4 Ply Twist Bolt-On Pad
Our Industrial Bolt On pads are excellent for cultured marble and fiberglass buffing. The heavy duty backing allows you to run at high RPM applications. Not for automotive use.
- Diameter: 7.5"
- Pile Height: 1.5"
- Mounting: Bolt On
- Material Type: 100% Wool 4ply Twist
- Material Color: Natural
- Application: Compounding
- Suggested RPM: 1750 - 2400
7.5" 100% Natural Wool 4 Ply Twist Bolt-On Pad
Our Bolt On Wool Buffing Pads are made with a strong backing construction and reinforced center hub. The extra thick wool pile and washable backing will handle all your buffing needs over time. We have a wide selection of wools and pile heights for all your Bolt On Buffing needs.
- Diameter: 7.5"
- Pile Height: 1.25"
- Mounting: Bolt On
- Material Type: 100% Wool 4ply Twist
- Material Color: Natural
- Application: Compounding
- Suggested RPM: 1750 - 2400
7.5" 100% Natural Wool 4 Ply Twist Bolt-On Pad
Our Bolt On Wool Buffing Pads are made with a strong backing construction and reinforced center hub. The extra thick wool pile and washable backing will handle all your buffing needs over time. We have a wide selection of wools and pile heights for all your Bolt On Buffing needs.
- Diameter: 7.5"
- Pile Height: 1.5"
- Mounting: Bolt On
- Material Type: 100% Wool 4ply Twist
- Material Color: Natural
- Application: Compounding
- Suggested RPM: 1750 - 2400
7.5" 100% Natural Wool 4 Ply Twist Bolt-On Pad
Our Bolt On Wool Buffing Pads are made with a strong backing construction and reinforced center hub. The extra thick wool pile and washable backing will handle all your buffing needs over time. We have a wide selection of wools and pile heights for all your Bolt On Buffing needs.
- Diameter: 7.5"
- Pile Height: 2"
- Mounting: Bolt On
- Material Type: 100% Wool 4ply Twist
- Material Color: Natural
- Application: Compounding
- Suggested RPM: 1750 - 2400
7.5" 100% Natural Wool 4 Ply Twist Bolt-On Pad
Our Bolt On Wool Buffing Pads are made with a strong backing construction and reinforced center hub. The extra thick wool pile and washable backing will handle all your buffing needs over time. We have a wide selection of wools and pile heights for all your Bolt On Buffing needs.
- Diameter: 7.5"
- Pile Height: 1.5"
- Mounting: Bolt On
- Material Type: 100% Wool 4ply Twist
- Material Color: Blue
- Application: Compounding
- Suggested RPM: 1750 - 2400
7.5" 100% Natural Wool 4 Ply Twist Bolt-On Pad with HD Backing
Our Bolt On Wool Buffing Pads are made with a strong backing construction and reinforced center hub. The extra thick wool pile and washable backing will handle all your buffing needs over time. We have a wide selection of wools and pile heights for all your Bolt On Buffing needs.
- Diameter: 7.5"
- Pile Height: 1.5"
- Mounting: Bolt On
- Material Type: 100% Wool 4ply Twist
- Material Color: Natural
- Application: Compounding
- Suggested RPM: 1750 - 2400
7.5" 100% Natural Wool 4 Ply Twist Grip Pad™
Our Grip Wool Buffing Pads have quality hook & loop material with plush durable fibers along with strong and washable backing structure. We have a wide selection of wools and pile heights for all your application needs.
- Diameter: 7.5"
- Pile Height: 1.25"
- Mounting: Grip Pad
- Material Type: 100% Wool 4ply Twist
- Material Color: Natural
- Application: Compounding
- Suggested RPM: 1750 - 2400
7.5" 100% Natural Wool 4 Ply Twist Grip Pad™
Our Grip Wool Buffing Pads have quality hook & loop material with plush durable fibers along with strong and washable backing structure. We have a wide selection of wools and pile heights for all your application needs.
- Diameter: 7.5"
- Pile Height: 1.5"
- Mounting: Grip Pad
- Material Type: 100% Wool 4ply Twist
- Material Color: Natural
- Application: Compounding
- Suggested RPM: 1750 - 2400