Microfiber Pads
1" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
Use 1 inch Buff and Shine Uro-Fiber Pads with a 1 inch backing plate.
2" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
Use 2 inch Buff and Shine Uro-Fiber Pad with a 2 inch backing plate.
3" Uro-Fiber™ Finisher Pad
- Made in the USA
- Patent Pending dual fiber stitch
- Strongest interface foam on the market
- Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
- Not recommended for a High-Speed/Rotary polisher
- Clean with soft nylon brush or compressed air per buffing cycle
- Able to cut, polish and finish on soft paints
- Washable
- Available in 6”, 5”, 3” diameters
If you like the overall performance and versatility of Buff and Shine’s Uro-Fiber pads (with the “black and white” fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.
It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call “The Uro-Fiber Twins”. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.
3" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
3 inch Buff and Shine Uro-Fiber Pad can be used with a 2 or 3 inch backing plate.
5" Uro-Fiber™ Finisher Pad
- Made in the USA
- Patent Pending dual fiber stitch
- Strongest interface foam on the market
- Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
- Not recommended for a High-Speed/Rotary polisher
- Clean with soft nylon brush or compressed air per buffing cycle
- Able to cut, polish and finish on soft paints
- Washable
- Available in 6”, 5”, 3” diameters
If you like the overall performance and versatility of Buff and Shine’s Uro-Fiber pads (with the “black and white” fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.
It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call “The Uro-Fiber Twins”. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.
5" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
Use 5 inch Buff and Shine Uro-Fiber Pads with a 5 inch backing plate
6" Uro-Fiber™ Finisher Pad
- Made in the USA
- Patent Pending dual fiber stitch
- Strongest interface foam on the market
- Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
- Not recommended for a High-Speed/Rotary polisher
- Clean with soft nylon brush or compressed air per buffing cycle
- Able to cut, polish and finish on soft paints
- Washable
- Available in 6”, 5”, 3” diameters
If you like the overall performance and versatility of Buff and Shine’s Uro-Fiber pads (with the “black and white” fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.
It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call “The Uro-Fiber Twins”. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.
6" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
6 inch Buff and Shine Uro-Fiber pad can be used with a 5 or 6 inch backing plate.
4" Black & Orange Micro Fiber Cutting Grip Pad™
Buff and Shine Micro fiber buffing pads are manufactured with precision in the USA using only the finest foam and micro fiber material. Buff and Shine Microfiber pads have beveled edges for FAST and EASY pad centering. Unique, back and plush micro fiber pad material is safe for both cutting and finishing applications. Buff and Shine Microfiber pads are built for maximum performance and long lasting durability on rotary and DA polishers.
- Face Dia: 4"
- Loop Dia: 3.5"
- Application: Cutting
4" Black & Black Micro Fiber Finishing Grip Pad™
Buff and Shine Micro fiber buffing pads are manufactured with precision in the USA using only the finest foam and micro fiber material. Buff and Shine Microfiber pads have beveled edges for FAST and EASY pad centering. Unique, back and plush micro fiber pad material is safe for both cutting and finishing applications. Buff and Shine Microfiber pads are built for maximum performance and long lasting durability on rotary and DA polishers.
- Face Dia: 4"
- Loop Dia: 3.5"
- Application: Polishing & Finishing
5.5" Black & Orange Micro Fiber Cutting Grip Pad™
Buff and Shine Microfiber buffing pads are manufactured with precision in the USA using only the finest foam and micro fiber material. Buff and Shine Microfiber pads have beveled edges for FAST and EASY pad centering. Unique, back and plush micro fiber pad material is safe for both cutting and finishing applications. Buff and Shine Microfiber pads are built for maximum performance and long lasting durability on rotary and DA polishers.
- Face Dia: 5.5"
- Loop Dia: 5"
- Application: Cutting
5.5" Black & Black Micro Fiber Finishing Grip Pad™
Buff and Shine Micro fiber buffing pads are manufactured with precision in the USA using only the finest foam and micro fiber material. Buff and Shine Microfiber pads have beveled edges for FAST and EASY pad centering. Unique, back and plush micro fiber pad material is safe for both cutting and finishing applications. Buff and Shine Microfiber pads are built for maximum performance and long lasting durability on rotary and DA polishers.
- Face Dia: 5.5"
- Loop Dia: 5"
- Application: Polishing & Finishing