Long Throw Polisher - Pads
The main characteristic of a long-throw or high-action dual-action polisher is that the oscillation pattern of the head is much wider than that of a standard dual-action polisher. That is, the pad swings out much farther as it orbits around the center. The amount that the pad swings out from the center of the machine is called “throw”. The extended throw of a high-action polisher creates more friction and action against the paint surface.
This gives long-throw or high-action dual-action polishers the capability to perform more extensive paint correction than the standard dual-action machine, while still maintaining a relatively large margin of safety against paint damage or overheating. Many technicians find that they can perform most standard paint correction activities without the need for moving up to a rotary polisher. Other technicians will follow up extensive rotary polisher correction sessions with a high-action D-A to remove swirls and technical imperfections left by the rotary.
So, the long-throw or high-action dual-action polisher is great for light to moderate paint perfection activities (perhaps even more), and also great for wax/sealant application.
6" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
6 inch Buff and Shine Uro-Fiber pad can be used with a 5 or 6 inch backing plate.
5" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
Use 5 inch Buff and Shine Uro-Fiber Pads with a 5 inch backing plate
6" Uro-Fiber™ Finisher Pad
- Made in the USA
- Patent Pending dual fiber stitch
- Strongest interface foam on the market
- Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
- Not recommended for a High-Speed/Rotary polisher
- Clean with soft nylon brush or compressed air per buffing cycle
- Able to cut, polish and finish on soft paints
- Washable
- Available in 6”, 5”, 3” diameters
If you like the overall performance and versatility of Buff and Shine’s Uro-Fiber pads (with the “black and white” fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.
It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call “The Uro-Fiber Twins”. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.
5" Uro-Fiber™ Finisher Pad
- Made in the USA
- Patent Pending dual fiber stitch
- Strongest interface foam on the market
- Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
- Not recommended for a High-Speed/Rotary polisher
- Clean with soft nylon brush or compressed air per buffing cycle
- Able to cut, polish and finish on soft paints
- Washable
- Available in 6”, 5”, 3” diameters
If you like the overall performance and versatility of Buff and Shine’s Uro-Fiber pads (with the “black and white” fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.
It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call “The Uro-Fiber Twins”. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.
3" Uro-Fiber™ Finisher Pad
- Made in the USA
- Patent Pending dual fiber stitch
- Strongest interface foam on the market
- Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
- Not recommended for a High-Speed/Rotary polisher
- Clean with soft nylon brush or compressed air per buffing cycle
- Able to cut, polish and finish on soft paints
- Washable
- Available in 6”, 5”, 3” diameters
If you like the overall performance and versatility of Buff and Shine’s Uro-Fiber pads (with the “black and white” fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.
It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call “The Uro-Fiber Twins”. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.